Call 401-726-0011

General Mechanic Tool Kit

The General Mechanics tool kit contains the standard tools needed in order to repair and maintain most vehicles. This is one of 3 different General Mechanics tool kits that we offer. This particular kit is more portable for easy use for the mechanic on the go. The 124 items in this kit are a variety of wrenches (adjustable, combination and open end), sockets (all 12PT), screwdrivers and hex keys to name a few. The kit also contains both metric and fractional sizing. All the items pack into a portable tool chest for easy travel. This kit is the same as GSA’s 5180-00-177-7033.

 

1 1 EA. Alignment Tool, 6″
2 1 EA. Alignment Tool, 7″, .050″
3 1 EA. Awl, Scratch 3-1/2″
4 1 EA. Bit, Screwdriver, Hex .125″ (1/8″)
5 1 EA. Bit, Screwdriver 4.0 MM
6 1 EA. Bit, Screwdriver 2.5MM
7 1 EA. Bit, Screwdriver, Hex .188″ (3/16″)
8 1 EA. Blade, Spline, 0.096″
9 1 EA. Bit, Screwdriver .109″ (7/64″)
10 1 EA. Bit, Screwdriver 5.0 MM
11 1 EA. Blade, Spline, 0.060″
12 1 EA. Bit, Screwdriver, Hex .078″ (5/64″)
13 1 EA. Bit, Screwdriver, Hex .156″ (5/32″)
14 1 EA. Bit, Screwdriver 1.5MM
15 1 EA. Bit, Screwdriver 2.0 MM
16 1 EA. Bit, Screwdriver 3.0 MM
17 1 EA. Bit, Screwdriver, Hex .062″ (1/16″)
18 1 EA. Blade, Spline, 0.072″
19 1 EA. Blade, Spline, 0.048″
20 1 EA. Bit, Screwdriver, Hex .050″
21 1 EA. Bit, Screwdriver 1.3MM
22 1 EA. Blade, Spline, 0.076″
23 1 EA. Blade, Spline, 0.069″
24 1 EA. Nutdriver Blade, 7MM
25 1 EA. Nutdriver Blade, 1/4″
26 1 EA. Nutdriver Blade, 6MM
27 1 EA. Nutdriver Blade, 9MM
28 1 EA. Nutdriver Blade, 3/8″
29 1 EA. Nutdriver Blade, 5.5MM
30 1 EA. Nutdriver Blade, 1/2″
31 1 EA. Nutdriver Blade, 4MM
32 1 EA. Nutdriver Blade, 4.5MM
33 1 EA. Nutdriver Blade, 11/32″
34 1 EA. Nutdriver Blade, 10MM
35 1 EA. Nutdriver Blade, 7/32″
36 1 EA. Nutdriver Blade, 11MM
37 1 EA. Nutdriver Blade, 8 MM
38 1 EA. Nutdriver Blade, 5MM
39 1 EA. Nutdrive Blade, 5/16″
40 1 EA. Nutdriver Blade, 7/16″
41 1 EA. Nutdriver Blade, 3/16″
42 1 EA. Brush, Solder
43 1 PG. Burnisher, Contact, Hand, 3 Pcs
44 1 EA. Stripper/Crimper, Wire
45 1 EA. Desoldering Tool
46 1 EA. Desoldering Wick
47 & 48 1 EA. Flashlight (MINI MAGLIGHT) Includes 2 AA Batteries 6135-01-165-0829
49 1 EA. Seizer, Soldering 5-1/2″ Straight
50 1 EA. Gage, Feeler, Thickness, 25 Blade
51 1 EA. Gage, Thickness, Metric
52 1 EA. Hammer, Ball Peen, 4oz.
53 1 EA. Handle, Screwdriver/Nutdriver Bit
54 1 EA. Handle, Screwdriver/Nutdriver
55 1 EA. Heat Sink, Soldering Aid
56 1 EA. Hook, Spring Adjusting (Pull)
57 1 EA. Hook, Spring Adjusting (Push)
58 1 SE. Hex Key Wr.Set,Met. 7pc, 2 MM – 8 MM
59 1 SE. Spline Key Wrench Set, 10 Pcs
60 1 EA. Bit, Screwdriver .141″ (9/64″)
61 1 EA. Bit, Screwdriver .094″ (3/32″)
62 1 EA. Knife, Electricians, 2 Blades
63 1 EA. Nutdriver, Hex, 3.0 MM
64 1 EA. Nutdriver, Hex 3.5 MM
65 1 EA. Oiler, Hand, 2 oz.
66 1 EA. Pallet, Tool Case; Bottom
67 1 EA. Pallet, Tool Case; Side Hinged
68 1 EA. Pliers, Needle Nose, 6.5″, CG
69 1 EA. Pliers, Short Nose, CG
70 1 EA. Pliers, Diagonal, 6″, CG
71 1 EA. Pliers, Diagonal, 4″, CG
72 1 EA. Pliers, Retaining Ring (External)
73 1 EA. Pliers, Retaining Ring (Internal)
74 1 EA. Pliers, Groove Joint, 10″, CG
75 1 EA. Punch, Center, Solid 3/32
76 1 EA. Punch, Drive Pin, 1/8″
77 1 EA. Punch, Drive Pin, 3 MM
78 1 EA. Punch, Drive Pin, 1 MM
79 1 EA. Punch, Drive Pin, 1/16″
80 1 EA. Roll, Tool, 12 Pocket
81 1 EA. Rule, Steel, Machinist, 6″
82 1 EA. Scissors, Electricians
83 1 SE. Screwdriver Set, Jeweler’s, 7 PC.
84 1 EA. Screwdriver, #1 Phillips, x 3″
85 1 EA. Screwdriver, #2 Phillips, Stubby
86 1 EA. Screwdriver, #2 Phillips x 4″
87 1 EA. Screwdriver, #2 Posidrive
88 1 EA. Screwdriver, #1 Posidrive
89 1 EA. Screwdriver, 1/4 ” Flat Tip, Stubby
90 1 EA. Screwdriver, 5/32″ x 10″
91 1 EA. Screwdriver, Flat Tip, 3/16″ x 5″
92 1 EA. Screwdriver, Flat Tip, 3/16″ x 6″
93 1 EA. Screwdriver, Flat , 3/32″ x 2″
94 1 EA. Screwdriver, Flat Tip, 1/4″ x 4″
95 1 EA. Screwdriver, Flat Tip, 1/4″ x 8″
96 1 EA. Screwdriver, Flat Tip, 5/16″ x 6″
97 1 EA. Screwdriver, Offset, 1/4″ x 1/4″
98 1 EA. Screwdriver, T-30 Torx
99 1 EA. Screwdriver, T-7 Torx
100 1 EA. Screwdriver, T-8 Torx
101 1 EA. Screwdriver, T-10 Torx
102 1 EA. Screwdriver, T-25 Torx
103 1 EA. Screwdriver, T-15 Torx
104 1 EA. Screwdriver, T-9 Torx
105 1 EA. Screwdriver, #0 Phillips
106 1 EA. Socket, 1/4″Drive, 6 Pt., 8 MM
107 1 EA. Socket, 1/4″Drive, 6 Pt., 5 MM
108 1 EA. Socket, 1/4″Drive, 6 Pt.,10 MM
109 1 EA. Socket, 1/4″Drive, 6 Pt., 9 MM
110 1 EA. Socket, 1/4″Drive, 6 Pt., 4 MM
111 1 EA. Socket, 1/4″Drive, 6 Pt., 6 MM
112 1 EA. Socket, 1/4″Drive, 6 Pt.,12 MM
113 1 EA. Socket, 1/4″Drive, 6 Pt., 7 MM
114 1 EA. Socket, 1/4″Drive, 6 Pt.,11 MM
115 1 SL. Solder, Tin Alloy, 1 lb.
116 1 EA. Soldering Aid Tool
117 1 EA. Soldering Iron, Electric
118 1 EA. Stripper, Wire Hand 10-20 AWG
119 1 EA. Tool Case, Portable
120 1 EA. Tweezer, Cross-Lock, 6-1/2″
121 1 SE. Wrench Set, Ignition, Metric, 8 PC.
122 1 SE. Wrench Set, O.E., Ignition, 8 Pcs.
123 1 EA. Wrench, Adjustable, 4″
124 1 EA. Wrench, Adjustable, 8″
125 1 EA. Nutdriver Blade, 9/32″
126 1 EA. Calculator Card
127 1 EA. Mirror, Inspection
128 1 SE. Socket Set, 1/4″ DR., 16 Pcs.

 

Contact Us

Our Location

  • 95 Grand Ave, Pawtucket RI –02861, USA
  • 401-726-0011
  • info@midlandsupply.com

Search kits

Thumb Gallery